Armor Seal™
Heavy Duty Floor Refinishing /
Coatings |
|
|
|
|
|
Industrial Floor Refinishing / Coatings |
ARMORSEAL™
700HS High Solids
WB Epoxy
Floor Coating
|
|
A two component, water-based finish coating specifically designed to provide an attractive uniform appearance
in industrial environments. This product is formulated for use in light to medium traffic conditions and moderate chemical exposure or
where a safe decorative coating is recommended. Applications include light assembly and production areas, hospitals, clean rooms, boiler
rooms, laboratories and industrial/commercial office areas.
|
ARMORSEAL™
300 Heay Duty
Non-Skid Coating
|
ARMORSEAL 300 is a catalyzed epoxy non-skid
floor coating that exhibits superior chemical resistance to
acids, alkalies, solvents, fuels, etc.. It is available in
one grit size and four colors and is recommended for environments
where a tough, chemically resistant, heavy duty non-skid is
required. Applications include waste treatment plants, petroleum
facilities, pulp and paper mills, mining facilities, chemical
plants, etc.
|
ARMORSEAL™
1000HS Marine &
Industrial Coating
|
ARMORSEAL 1000HS is a two component, high solids,
polyamide epoxy floor coating formulated for demanding industrial
and marine applications. It is a heavy duty interior/exterior
coating which can be applied to concrete, steel and wood surfaces
and exhibits superior resistance to chemicals, moisture, abrasion
and impact. ARMORSEAL 1000HS meets USDA standards for maintenance
protective coatings not in direct contact with food. It has
excellent resistance to alkalies, acids, solvents, jet fuel
and grease. This product is also available as a three component
antislip floor coating where safety and durability are prime
requirements.
|
ARMORSEAL™ CRU
Polyester Urethane
Coating
|
ARMORSEAL CRU is a heavy duty, chemically resistant, two component interior/exterior polyester urethane industrial floor
coating. This VOC compliant coating cures to a high gloss, flexible finish with superior color retention and chalk resistance. It is formulated
to protect concrete, steel or wood substrates in difficult industrial environments and it provides excellent durability against exterior
exposure, abrasion, impact and chemical attack. Recommended industrial uses include laboratories, warehouses, production/assembly areas
and aircraft hangars.
|
ARMORSEAL™
650 SL/RC
100% Solids
Self-Leveling Epoxy
|
ARMORSEAL 650 SL/RC is a 100% solids, two component, recoatable, self-leveling epoxy floor coating. This high performance floor system
meets USDA and State VOC regulations and is available in five colors plus clear. It provides a seamless hygienic coating system that
is extremely durable and can be applied to smooth or mildly spalled concrete where a level high gloss finish is required. ARMORSEAL 650
SL/RC is especially suitable for clean rooms, aircraft hangars, laboratories, workshops and light assembly areas. This product can be
applied at dry film thicknesses of 10-50 mils (250-1250µm) by using 3/8” (9.5mm) roller or notched squeegee. A non-skid additive
is available.
|
ARMORSEAL™
650 HB
(High Build)
100% Solids
Self-Leveling Epoxy
|
ARMORSEAL 650 HB is 100% solids, three component, recoatable, self-leveling epoxy floor coating. This high-build version
of ARMORSEAL 650 can be applied at dry film thicknesses of 50-250 mils (1270-6350µm). It provides a heavy duty topping for production
and dense traffic areas and is recommended for use on moderately spalled, eroded or cracked surfaces where a smooth, high gloss finish
is required. ARMORSEAL 650 meets USDA and State VOC regulations. It is available in five colors plus clear and exhibits superior chemical
and abrasion resistance. This product’s ease of application and cure time make it perfect for weekend projects.
|
ARMORSEAL™
5020
Heavy Duty
Floor Resurfacer
|
ARMORSEAL 5020 is a three component, trowelable epoxy surfacing and leveling compound for new or old concrete floors where
a high degree of chemical and abrasion resistance is required. The physical properties of ARMORSEAL 5020 are much greater than concrete.
Excellent abrasion and impact resistance recommend it for high traffic areas. Its 100% reactive epoxy formulation conforms to present OSHA
and USDA requirements, permitting applications in any food processing facility. This seamless resurfacer provides a barrier to bacterial
growth and is designated for use where sanitary, chemical resistant, antiskid floor is required. |
ARMORSEAL™
5020 AR
Acid Resistant
Floor Resurfacer
|
A trowelable, acid resistant epoxy resurfacer used to protect concrete, steel or wood in many corrosive environments, including
98% sulfuric acid exposure. The physical properties of ARMORSEAL 5020 AR are much higher than those of concrete. Its excellent acid resistant
properties make it superior for substrate protection. It is a 100% reactive epoxy system formulated to conform to present OSHA requirements
for mixing, handling and usage and is designed for use where a durable, sanitary, chemical resistant anti-skid floor is required. It meets
USDA standards for maintenance protective coatings not in direct contact with food in federally inspected meat and poultry plants. |
|
